Home | Fanuc Controls | Fanuc Drives | Fugi Drives | Fanuc Motors | Fanuc Spindle Drives | Fanuc Encoder | Fanuc repairs
Gettys Motors | GE Motors | Fanuc Manuals | Fanuc Bmu Memory | More parts We Sell | Mechanical Parts | FANUC RS232 SOFTWARE
Cnc Machines | Fanuc Software/plc | Fanuc Tape readers | Fanuc Pulse Encoders | Miscellaneous | Fanuc PLCs @ I/O
Probes | GEFANUC Sensors | Fanuc Transformers | Fanuc Robot parts | fanuc exchange | Fanuc chips | indramat spares
Fanuc Monitors | Fanuc Servo Drives | okuma spares | fanuc numbers | fanuc alarms | currency converter | News| fanuc 6m spares | fanuc 6T spares | fanuc 5 spares | fanuc 7 spares | fanuc 0 spares | fanuc 3 spares | fanuc 9 spares | fanuc 2000/3000 spares | fanuc 10 spares | fanuc 11 spares | fanuc 15 spares |fanuc 16 & 18 spares |fanuc 21 & power mate spares | fanuc mate M spares |fanuc robot control spares | fanuc NEF spares | GE 2000 spares | GE 1050 spares | CNC Related Links

IC693MDL645 Large Stock

A61L-0001-0074 NEW CRT

A61L-0001-0096

Industrail Electronic Repair

EMAIL n co ntrol

Our Selection 0f New Or Used Fanuc,Ge fanuc PLC Components - Changing Daily :

 Fanuc Plcs Input / Fanuc Output Moduals

IF YOU ARE LOOKING FOR GE Fanuc CNC Parts

FAQs :: Fanuc Repair Service :: Fanuc Exchange :: Sales :: Service :: Testing

GE Fanuc CNCs and Power Mates support a variety of I/O interfaces. Newer CNCs and Power Mates support one or more I/O networks for servicing I/O within the machine tool or transfer line. These networks are also well suited for interfacing with devices peripheral to the machine tool, resulting in a more highly-integrated production cell.

GE Fanuc also supports a growing number of open I/O standards. These are popular wherever the end-user wants to purchase I/O devices from a variety of vendors. All of the devices compliant to a particular standard can talk to one another, regardless who makes them. These products usually carry a higher price tag due to their enhanced inter-operability and intelligence.

The FANUC I/O Link provides high-speed serial data transmission between a CNC or Power Mate and a large range of networked devices. It supports up to 2048 inputs and 2048 outputs on each I/O Link network. Cabling consists of a simple pair of wires which may be supplemented by fiber-optic links to cover larger distances.

Typical I/O devices are I/O Model A and Connector Type I/O, used for I/O devices distributed throughout the bed of the machine tool, and specialty I/O interface cards such as Connection Units used for interfacing to Machine Operator Panels.

Auxiliary devices may also be connected to the CNC via the I/O link, performing functions such as loading and unloading, bar feeding and inspection stations, to list just a few. Typical auxiliary devices are Power Mates, Beta Motors with I/O Link Interface, 90-30 PLCs, and Loader Robots from Fanuc Robotics.

The I/O Link provides a highly reliable network for controlling I/O within the machine tool bed as well as throughout the associated Machining Cell or Transfer Line.

Additional I/O links are now available for the Fanuc Series 16i, 18i and 21i CNCs. They will benefit machine builders and users alike.

Of special interest to European machine tool builders is the news that an I/O link AS-i converter can now be supplied for use in-line with the operators panel module, and connector panel module, for communicating with such AS-i modules on the market as: actuator sensors, solenoid valves, limit switches and similar devices.

Its features permit the distributed positioning of small waterproof I/O modules which makes for less wiring and smaller cabinets. Furthermore, the actual wiring itself is easier, with a single, two-wire, cable for both data communications and Fanuc power supply. It can be branched-off at any position and simple pin-piercing connections made.

AS-i is an I/O level network which communicates between a controller and sensors and/or actuators. Of the 256/Input and 256/Output points of the I/O link the specification allows for up to 124/124 Data Input/Data Output points leaving the rest free for status observation. Maximum line length is 100m, but this can be extended to 300m if repeater/extenders are used, and there can be up to 31 slaves on one line.

With a maximum cycle time of only 5 ms, and the ability to connect to third party sensors and actuators etc, machine designers are afforded greater flexibility than ever before in their ability to offer equipment which will match a wider range of end users specific needs. The 24V DC unit can be DIN rail or screw mounted.

Older CNCs and Power Mates come equipped with an I/O circuit board built-in to the CNC or Power Mate chassis. The outputs may be either sink or source type. The number of I/O circuits is limited by the capacity of the I/O board supplied.

MORE A03B-0801 PLC CARDS IC693MDL645

Home | Fanuc Controls | Fanuc Drives | Fugi Drives | Fanuc Motors | Fanuc Spindle Drives | Fanuc Encoder | Fanuc repairs
Gettys Motors | GE Motors | Fanuc Manuals | Fanuc Bmu Memory | More parts We Sell | Mechanical Parts | FANUC RS232 SOFTWARE
Cnc Machines | Fanuc Software/plc | Fanuc Tape readers | Fanuc Pulse Encoders | Miscellaneous | Fanuc PLCs @ I/O
Probes | GEFANUC Sensors | Fanuc Transformers | Fanuc Robot parts | fanuc exchange | Fanuc chips | indramat spares
Fanuc Monitors | Fanuc Servo Drives | Cnc Related Links | okuma spares | fanuc numbers | fanuc alarms | currency converter | News| fanuc 6m spares | fanuc 6T spares | fanuc 5 spares | fanuc 7 spares | fanuc 0 spares | fanuc 3 spares | fanuc 9 spares | fanuc 2000/3000 spares | fanuc 10 spares | fanuc 11 spares | fanuc 15 spares |fanuc 16 & 18 spares |fanuc 21 & power mate spares | fanuc mate M spares |fanuc robot control spares | fanuc NEF spares | GE 2000 spares | GE 1050 spares | fanuc boards

CNC Spares and Repairs - Fanuc Spare Parts
Telephone: 07568431113

EMAIL